Pipe Clamp ZE
Pipe Clamps ZE are designed for fastening plastic, metal/plastic and metal pipes, hoses, metal hoses and cables to structures and any metal, wooden, RF concrete, foam concrete, brick etc. surfaces.
Pipe Clamps are designed and manufactured of first use materials taking into account a number of regulations and standards in construction industry. These products are of new design resistant to mechanical loads and hydraulic shocks and are designed for wide range of temperatures taking into account operation conditions of hot water and heating pipe lines.
Low combustible version is available as necessary. The product has ergonomic design: the wide base overlaps dowel hole, the rear foot of the base is inclined to make it larger.
Except nominal diameters it is also possible to secure pipe with the upper foil layer (‘stable pipes’) and other pipes and hoses of outer diameter exceeding the nominal up to 2mm (0.08 in).
BASIC TYPES AND DIMENSIONS
| Item | D mm (in) |
d1 mm (in) |
B1 mm (in) |
B2 mm (in) |
H mm (in) |
|---|---|---|---|---|---|
| PClamp ZE 16-18 | 17.90 | 6.10 | 27.20 | 30.00 | 13.50 |
| (0.70) | (0.24) | (1.07) | (1.18) | (0.53) | |
| PClamp ZE 20-22 | 21.90 | 6.10 | 33.50 | 36.00 | 15.00 |
| (0.86) | (0.24) | (1.32) | (1.42) | (0.59) | |
| PClamp ZE 25-27 | 26.90 | 6.10 | 39.00 | 43.00 | 16.00 |
| (1.06) | (0.24) | (1.54) | (1.69) | (0.63) | |
| PClamp ZE 32-34 | 33.90 | 6.10 | 46.50 | 51.50 | 17.00 |
| (1.33) | (0.24) | (1.83) | (2.03) | (0.67) | |
| PClamp ZE 40-42 | 41.90 | 8.10 | 55.00 | 58.00 | 17.50 |
| (1.65) | (0.32) | (2.17) | (2.28) | (0.69) | |
| PClamp ZE 50-52 | 51.90 | 8.10 | 63.50 | 68.00 | 18.50 |
| (2.04) | (0.32) | (2.50) | (2.68) | (0.73) | |
| PClamp ZE 63-65 | 64.90 | 8.10 | 80.00 | 83.00 | 19.50 |
| (2.56) | (0.32) | (3.15) | (3.27) | (0.77) |